TimberCraft Blog » teak wood dining tables
How to Pick the Correct Dining Table Set for Your Home?
The best dining table for you will be one that works out within your budget, is strongly built, fits in your space and has a style you'll cherish for a considerable length of time. There are some center elements you ought to consider while picking a decent one.
To start with, be careful about surrendering to trends, said Nischala, an ace furniture restorer and the Co- Founder of "Timber Craft," who noticed that a decent table should lasts any where between five to ten years. “If you get something too funky, with too many weird details, one day you may wake up and wonder what you were thinking," he said. "Keep it basic and strong."
Alongside budget and an timeless style, stability and construction are critical to search for when reviewing tables at furniture stores. Consider how it feels to sit at one of those tables, If you’d like some specific recommendations from timbercraft dining tables.
Here are some more things to check :
Use your measuring tape
The main guideline: Your dining table needs to accommodate your dining area! In any case, an dining table is a huge household item, and you have to provide space around it, as well.
"In addition to the table, you'll need three feet of breathing space on all sides — and more is better — to serenely sit in a seat and move around the space," So whether it's a piece of a multi use space or a different lounge area, start by estimating the length and width of the space you can commit to the dining table. At that point subtract around six feet from those two estimations to get an idea dining table dimensions.
Next, consider how you're going to use the table. "Figure that each spot at the table needs 22 to 24 inches of table space and that bigger scope seats will require more.
Visual weight” of a piece of furniture can really influence how big it feels in a room. It may technically fit, but it’ll seem huge if it’s a dark or bulky piece or if it’s too close to other furniture.
For an idea how a bigger piece of furniture will look, take the time to mark out the dimensions on the floor , and also the height of the table. I usually stand on my tape corners with a tape measure, then try to fill in that space with furniture of a similar size (like a couple of chairs), and take a step back to see how it’ll feel. It also helps to have a someone stand there with the tape measure while you have a look.
In case you're tight on space, consider alternatives like expandable dining tables. These tables let you modify the table for various needs and gathering sizes.
The only caution in such furniture is that : a large number of components that are joined or covered up inside the table and If you buy things that are too complicated, it’s just more possibility for something to fail,”
Think about your needs before choosing shape
Square and rectangular tables are the most widely recognized, so you'll locate the more noteworthy number of decisions there with styles, sizes and extendable choices. Be that as it may, a round or oval table can give you somewhat more space to move around since it removes the corners yet at the same time has a decent surface zone. "For more tightly, rectangular spaces, the oval may be the best choice.
"Round or oval tables can be incredible for gatherings and discussion in light of the fact that there's no leader of the table, however you can lose a little space for serving pieces once you have all your place settings at a round or oval table.
Focus on the table supports
The base — typically legs, a platform, or a trestle — can affect what number of individuals you can fit at a table. "You simply need to be certain the leg space isn't being blocked by the supports. At the point when you see a table face to face, sit at it to check whether your legs hit the table's legs. Confirm you have enough space for your knees when you hurry right in, and in the event that you can fold your legs underneath the table. The cover — the casing that holds up the tabletop — can eliminate your space to move.
On the off chance that you need to be increasingly adaptable with your visitors, focus on the leg width and where the legs are put. "All in all, a table with more slender legs, or where the legs are at the corners, will make it simpler to crush an additional seat in. A leg table is commonly restricted to what extent it very well may be stretched out without bowing in the center."
With a pedestal or trestle table, you have more flexibility to add more people to the table. “A center base is the best option to accommodate more chairs in. But, be wary of larger round pedestal-style tables because they can be a little less sturdy than those with four-legs.
Trestle tables can give you flexibility along the sides of the table, but can block space at the ends of it. Always look at how much space there is between the edge of the table and where the trestle supports are attached to make sure there’s space for your knees.
Pick the correct table materials for your style
Picking the material for your dining table can be little difficult. You have to balance cost, maintenance, and your personal style to choose the right one, and a table that’s not a good fit on any of those could mean a buying decision you regret later. Some of the most common materials, and what to consider for each:
Wood: Solid wood is a classic material because it is durable and easy to repair. Pine, acacia, mango and teak are popular options. “Solid wood is the most popular, though it’s often the most expensive. Manufacturers have been working to bring down the price of solid wood furniture. Wood expands and contracts with heat and humidity and can show scratches and wear, but is fairly easy to repair.
Veneer/Wood-Look: Wood veneer is often a more affordable alternative to solid wood. Here a very thin layer of solid wood (or material printed to look like wood) is glued to a plywood or other wood core. To identify good veneer dining tables, look for tables with good quality plywood support below the veneer. One way to spot cheaper veneer tables is to look underneath the table at the store. “If just the outside is finished, but the underneath looks like a different material, the manufacturer is cutting costs,.
Particle Board/ Mdf: Simply avoid particle board and MDF dining tables,
Stone and Stone-Look: Stone tabletops can incorporate marble, quartz composite or cast stone (like concrete). Stone is sturdy yet can be permeable and can retain recolors no problem at all. "Contingent upon how it's made, it can chip or break,and once that occurs, it very well may be extreme or difficult to fix. They can likewise be very substantial. The cost of stone can truly fluctuate and will run into the thousands.
Glass: Glass tabletops can include clear, frosted or tinted versions. They’re relatively inexpensive and “can create a feeling of space and openness.. Though glass isn’t susceptible to moisture, it can chip, scratch or crack from heat. It also shows every fingerprint. A good glass table top can last decades if you’re not too clumsy, but it will start to look bad quickly if you’re prone to chipping the edges or scratching the tabletop.
Metal: Metal, Metal, including stainless steel, brass, zinc and lacquered or painted versions of these, is used more frequently for table bases than tops. “Metal is durable and not easily damaged. But because of its higher-shine, it shows every fingerprint and can require special cleaning tools. Also, painted metals can be hard to repair. These can be less expensive than wood tables, though it’s rare to find an all-metal dining table beyond utility tables.
Plastic: Man-made materials, either molded into a shape or glued onto plywood or another core, are an inexpensive option. “They can last a long time, but aren’t considered the nicest quality material. These materials tend to resist staining and require little upkeep, but they’re often perceived as cheap.
A good dining table should be sturdy and well-constructed, with a finish that withstands heavy use and shows little obvious wear and tear. “The material is a major part of good construction , but a dining table is only as good as the joinery. The joinery is the industry term for the places where the base and tabletop fit together — the more solid this is, the more durable.
Look underneath the dining tables at the store: Wood joined directly with wood is very strong; too many attachments and hooks can weaken the construction. In general, simpler is better. “Look at the connection points where the legs meet the table tops and at the corners — if the joints are starting to separate, you see gaps at the corners, or it’s wobbly when you move it, it’s not well constructed.And beware of really inexpensive tables: They could be held together just with staples and glue.
A note on chairs for your new dining table: If you don’t have dining chairs already, the most important thing is to make sure the new ones fit at the table. “People used to always buy dining tables and chairs as sets, but don’t do that as much anymore.If you’re starting from scratch and buying online, buy as a set, but if you’re in-store, you can try out different floor models. “People should feel free to mix and match In a small space,also consider buying extra dining chairs and using them in other rooms when you don’t need them at the dining table to save space.